Skip to top navigation
Skip to my shopping bag
Skip to main content
Skip to footer links
Dalbello Panterra 120 GW Ski Boots - Men's
Sold out
The fine tuned Panterra 120 GW with Powercage design combines that well known fit and dynamic performance with great support, comfort and easy step in/step out.
Comfort and performance-the new Panterra 120 GW has it all. A high flex index makes it the model of choice for demanding and sporty "all-inclusive" skiers who not only value dynamic skiing characteristics but, above all, individual customization. The integration of the Powercage design and the milled outer shell result in great power distribution across the entire boot and reduce the weight without compromising on stability. The variable sole angle with a canting system under the foot and the adjustable cuff volume provide additional options for adapting the boot to meet individual preferences. A new tongue provides better shell integration, improved ergonomics, more rebound and a very supportive flex. The cabrio design also impresses with a three-piece structure featuring uniform flex and shock absorption as well as lateral and rear support. In addition, stepping in and out of the boot are easier than ever. The new IF liners deliver more toe space in the neoprene toe box and a higher comfort. GripWalk soles, hike mode with a 51° ski/hike range, and MyFit technology for an individually adaptable liner and outer shell offer everything you need for optimum wearing comfort. The 3D grip texture furthermore makes the Panterra extremely robust.
Features
• If Comp: 80% of this high performance fitting liner can be thermo formed in four minutes only. The special medium density of ultralon foam cushions the foot as great as it supports the power transmission
• 3D grip texture: The irregular pattern of the 3D grip textURE gives this extra grip when walking on groomed slopes or fresh snow and positively influences the balanced stiffness of the boot. The 3D grip texture adds material right at the spot where it is needed to stiffen the the lower shell for an improved power transmission from boot to ski. In addition, the structure avoids scratches and improves the overall durability
• Low cuff hinge point: High leverage cuff assembly with hinge points mounted approximately 10 cm lower than standard construction boot designs
• Variable volume shell fit: Exclusive Dalbello Technology: Developed to permit skiers to regulate overall boot width from a range of 102 to 100mm. Set it, and forget it. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles
• Dynalink heel retention system: The Dynalink heel retention is an independently functioning heel/instep closure assembly which minimizes foot sliding, heel lift and boot shell distortion during the flex effectively
• Adjustable rear cuff spoiler Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler Permits skiers to increase rear cuff height add rear support and change forward lean
Comfort and performance-the new Panterra 120 GW has it all. A high flex index makes it the model of choice for demanding and sporty "all-inclusive" skiers who not only value dynamic skiing characteristics but, above all, individual customization. The integration of the Powercage design and the milled outer shell result in great power distribution across the entire boot and reduce the weight without compromising on stability. The variable sole angle with a canting system under the foot and the adjustable cuff volume provide additional options for adapting the boot to meet individual preferences. A new tongue provides better shell integration, improved ergonomics, more rebound and a very supportive flex. The cabrio design also impresses with a three-piece structure featuring uniform flex and shock absorption as well as lateral and rear support. In addition, stepping in and out of the boot are easier than ever. The new IF liners deliver more toe space in the neoprene toe box and a higher comfort. GripWalk soles, hike mode with a 51° ski/hike range, and MyFit technology for an individually adaptable liner and outer shell offer everything you need for optimum wearing comfort. The 3D grip texture furthermore makes the Panterra extremely robust.
Features
• If Comp: 80% of this high performance fitting liner can be thermo formed in four minutes only. The special medium density of ultralon foam cushions the foot as great as it supports the power transmission
• 3D grip texture: The irregular pattern of the 3D grip textURE gives this extra grip when walking on groomed slopes or fresh snow and positively influences the balanced stiffness of the boot. The 3D grip texture adds material right at the spot where it is needed to stiffen the the lower shell for an improved power transmission from boot to ski. In addition, the structure avoids scratches and improves the overall durability
• Low cuff hinge point: High leverage cuff assembly with hinge points mounted approximately 10 cm lower than standard construction boot designs
• Variable volume shell fit: Exclusive Dalbello Technology: Developed to permit skiers to regulate overall boot width from a range of 102 to 100mm. Set it, and forget it. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles
• Dynalink heel retention system: The Dynalink heel retention is an independently functioning heel/instep closure assembly which minimizes foot sliding, heel lift and boot shell distortion during the flex effectively
• Adjustable rear cuff spoiler Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler Permits skiers to increase rear cuff height add rear support and change forward lean
flex
Stiff
ski_type
All-Mountain, On-Piste
skill_level
Intermediate, Advanced
The fine tuned Panterra 120 GW with Powercage design combines that well known fit and dynamic performance with great support, comfort and easy step in/step out.
Comfort and performance-the new Panterra 120 GW has it all. A high flex index makes it the model of choice for demanding and sporty "all-inclusive" skiers who not only value dynamic skiing characteristics but, above all, individual customization. The integration of the Powercage design and the milled outer shell result in great power distribution across the entire boot and reduce the weight without compromising on stability. The variable sole angle with a canting system under the foot and the adjustable cuff volume provide additional options for adapting the boot to meet individual preferences. A new tongue provides better shell integration, improved ergonomics, more rebound and a very supportive flex. The cabrio design also impresses with a three-piece structure featuring uniform flex and shock absorption as well as lateral and rear support. In addition, stepping in and out of the boot are easier than ever. The new IF liners deliver more toe space in the neoprene toe box and a higher comfort. GripWalk soles, hike mode with a 51° ski/hike range, and MyFit technology for an individually adaptable liner and outer shell offer everything you need for optimum wearing comfort. The 3D grip texture furthermore makes the Panterra extremely robust.
Features
• If Comp: 80% of this high performance fitting liner can be thermo formed in four minutes only. The special medium density of ultralon foam cushions the foot as great as it supports the power transmission
• 3D grip texture: The irregular pattern of the 3D grip textURE gives this extra grip when walking on groomed slopes or fresh snow and positively influences the balanced stiffness of the boot. The 3D grip texture adds material right at the spot where it is needed to stiffen the the lower shell for an improved power transmission from boot to ski. In addition, the structure avoids scratches and improves the overall durability
• Low cuff hinge point: High leverage cuff assembly with hinge points mounted approximately 10 cm lower than standard construction boot designs
• Variable volume shell fit: Exclusive Dalbello Technology: Developed to permit skiers to regulate overall boot width from a range of 102 to 100mm. Set it, and forget it. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles
• Dynalink heel retention system: The Dynalink heel retention is an independently functioning heel/instep closure assembly which minimizes foot sliding, heel lift and boot shell distortion during the flex effectively
• Adjustable rear cuff spoiler Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler Permits skiers to increase rear cuff height add rear support and change forward lean
Comfort and performance-the new Panterra 120 GW has it all. A high flex index makes it the model of choice for demanding and sporty "all-inclusive" skiers who not only value dynamic skiing characteristics but, above all, individual customization. The integration of the Powercage design and the milled outer shell result in great power distribution across the entire boot and reduce the weight without compromising on stability. The variable sole angle with a canting system under the foot and the adjustable cuff volume provide additional options for adapting the boot to meet individual preferences. A new tongue provides better shell integration, improved ergonomics, more rebound and a very supportive flex. The cabrio design also impresses with a three-piece structure featuring uniform flex and shock absorption as well as lateral and rear support. In addition, stepping in and out of the boot are easier than ever. The new IF liners deliver more toe space in the neoprene toe box and a higher comfort. GripWalk soles, hike mode with a 51° ski/hike range, and MyFit technology for an individually adaptable liner and outer shell offer everything you need for optimum wearing comfort. The 3D grip texture furthermore makes the Panterra extremely robust.
Features
• If Comp: 80% of this high performance fitting liner can be thermo formed in four minutes only. The special medium density of ultralon foam cushions the foot as great as it supports the power transmission
• 3D grip texture: The irregular pattern of the 3D grip textURE gives this extra grip when walking on groomed slopes or fresh snow and positively influences the balanced stiffness of the boot. The 3D grip texture adds material right at the spot where it is needed to stiffen the the lower shell for an improved power transmission from boot to ski. In addition, the structure avoids scratches and improves the overall durability
• Low cuff hinge point: High leverage cuff assembly with hinge points mounted approximately 10 cm lower than standard construction boot designs
• Variable volume shell fit: Exclusive Dalbello Technology: Developed to permit skiers to regulate overall boot width from a range of 102 to 100mm. Set it, and forget it. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles
• Dynalink heel retention system: The Dynalink heel retention is an independently functioning heel/instep closure assembly which minimizes foot sliding, heel lift and boot shell distortion during the flex effectively
• Adjustable rear cuff spoiler Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler Permits skiers to increase rear cuff height add rear support and change forward lean
flex
Stiff
ski_type
All-Mountain, On-Piste
skill_level
Intermediate, Advanced