Skip to top navigation
Skip to my shopping bag
Skip to main content
Skip to footer links
Yakima BackSwing Hitch Rack Swing Adapter
Colour
Size
Size
OS
Now you can rack up the bikes and still access your tailgate.
The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Features
• Hitch extension converts most 2" hitch products to a swing-away rack
• Provides easy tailgate access - even with a rack fully loaded with bikes
• Easily swings open 90 degrees and locks in place with the simple to use release lever
• Safety latch secures the rack closed while you're on the road
• Secures to any 2" hitch receiver using a threaded pin
• Included SKS (Same Key System) lock keeps the rack secure
• 250 lb maximum load capacity (rack plus gear)
• NOT compatible with an RV, camper or travel trailer
Specifications
• Weight: 35.46 lbs
• Dimensions: L 20 in x W 30 in x H 8 in
• Installation details: Some Assembly Required (5 Minute Install)
• Compatible with the following Yakima Racks: HangOver 4, HangTight 4, StageTwo 2", StageTwo +2, Holdup EVO 2", HoldUp EVO +2, Holdup 2", Holdup +2, OnRamp 2", Onramp LX 2", SingleSpeed, FourTimer, TwoTimer (2" only), LongHaul (Vans and Passenger Vehicles Only), RoadTrip (Vans and Passenger Vehicles Only), Dr.Tray 2" (without the EZ+1 attached)
The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Features
• Hitch extension converts most 2" hitch products to a swing-away rack
• Provides easy tailgate access - even with a rack fully loaded with bikes
• Easily swings open 90 degrees and locks in place with the simple to use release lever
• Safety latch secures the rack closed while you're on the road
• Secures to any 2" hitch receiver using a threaded pin
• Included SKS (Same Key System) lock keeps the rack secure
• 250 lb maximum load capacity (rack plus gear)
• NOT compatible with an RV, camper or travel trailer
Specifications
• Weight: 35.46 lbs
• Dimensions: L 20 in x W 30 in x H 8 in
• Installation details: Some Assembly Required (5 Minute Install)
• Compatible with the following Yakima Racks: HangOver 4, HangTight 4, StageTwo 2", StageTwo +2, Holdup EVO 2", HoldUp EVO +2, Holdup 2", Holdup +2, OnRamp 2", Onramp LX 2", SingleSpeed, FourTimer, TwoTimer (2" only), LongHaul (Vans and Passenger Vehicles Only), RoadTrip (Vans and Passenger Vehicles Only), Dr.Tray 2" (without the EZ+1 attached)
Now you can rack up the bikes and still access your tailgate.
The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Features
• Hitch extension converts most 2" hitch products to a swing-away rack
• Provides easy tailgate access - even with a rack fully loaded with bikes
• Easily swings open 90 degrees and locks in place with the simple to use release lever
• Safety latch secures the rack closed while you're on the road
• Secures to any 2" hitch receiver using a threaded pin
• Included SKS (Same Key System) lock keeps the rack secure
• 250 lb maximum load capacity (rack plus gear)
• NOT compatible with an RV, camper or travel trailer
Specifications
• Weight: 35.46 lbs
• Dimensions: L 20 in x W 30 in x H 8 in
• Installation details: Some Assembly Required (5 Minute Install)
• Compatible with the following Yakima Racks: HangOver 4, HangTight 4, StageTwo 2", StageTwo +2, Holdup EVO 2", HoldUp EVO +2, Holdup 2", Holdup +2, OnRamp 2", Onramp LX 2", SingleSpeed, FourTimer, TwoTimer (2" only), LongHaul (Vans and Passenger Vehicles Only), RoadTrip (Vans and Passenger Vehicles Only), Dr.Tray 2" (without the EZ+1 attached)
The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Features
• Hitch extension converts most 2" hitch products to a swing-away rack
• Provides easy tailgate access - even with a rack fully loaded with bikes
• Easily swings open 90 degrees and locks in place with the simple to use release lever
• Safety latch secures the rack closed while you're on the road
• Secures to any 2" hitch receiver using a threaded pin
• Included SKS (Same Key System) lock keeps the rack secure
• 250 lb maximum load capacity (rack plus gear)
• NOT compatible with an RV, camper or travel trailer
Specifications
• Weight: 35.46 lbs
• Dimensions: L 20 in x W 30 in x H 8 in
• Installation details: Some Assembly Required (5 Minute Install)
• Compatible with the following Yakima Racks: HangOver 4, HangTight 4, StageTwo 2", StageTwo +2, Holdup EVO 2", HoldUp EVO +2, Holdup 2", Holdup +2, OnRamp 2", Onramp LX 2", SingleSpeed, FourTimer, TwoTimer (2" only), LongHaul (Vans and Passenger Vehicles Only), RoadTrip (Vans and Passenger Vehicles Only), Dr.Tray 2" (without the EZ+1 attached)